Loading

Brand:  BEHRINGER

MODEL:  NX3000D

Behringer NX3000D Power Amplifier with DSP

AED 1,859
Same-day to 2-day delivery
Check availability in store

NX3000D
The NX3000D power amplifier packs 3000 Watts (2 x 1500 Watts @ 2 Ohms; 2 x 900 Watts @ 4 Ohms; 3000 Watts into 4 Ohms bridge mode) into exceptionally lightweight (7.9 lbs / 3.6 kg) and rack-mountable packages. Plus, the built-in DSP and 24-bit/ 96 kHz converters ensure the ultimate signal integrity with an extremely broad dynamic range. And because the NX3000D is so much more efficient than conventional designs, it runs cooler and doesn’t require the massive heat sinks and heavy toroid transformers typically associated with its conventional counterparts. Thanks to our “Zero-Attack” limiters that offer maximum output level with exceptionally-reliable overload protection and SmartSense Loudspeaker impedance compensation, which provides fully linear frequency response at any speaker load impedance, you can run the NX3000D full-out for hours on-end. Our revolutionary high-density Class-D technology, combined with an ultra-efficient, switch-mode power supply ensure this feather-light powerhouse will drive your rig effortlessly for many years to come.

Delivers 2 x 1500 Watts into 2 Ohms; 2 x 900 Watts into 4 Ohms; 3000 Watts into 4 Ohms (bridge mode) and weighs less than 7.9 lbs / 3.6 kg

Ultimate reliability through revolutionary cool-running High-Density Class-D technology with "near-zero" thermal buildup

Ultra-efficient switch-mode power supply for noise-free audio, superior transient response and low power consumption

High-performance DSP and 24-bit/96 kHz converters deliver ultimate signal integrity and extreme dynamic range

DSP section features sophisticated delay, crossover (3 filter types, up to 48 dB/octave), EQ (8 parametric, 2 dynamic), dynamics processing and lockable security settings

SmartSense Loudspeaker impedance compensation features fully linear frequency response at any speaker load impedance

Front panel LCD display enables setup and adjustment without PC

Can be set up, controlled and monitored via rear panel USB connector. Powerful remote software downloadable at behringer.com

"Zero-Attack" limiters offer maximum output level with reliable overload protection

Built-in Subwoofer/Satellite crossover for perfect subwoofer operation

Detented gain controls for precise level setting

Precise 4-segment Signal and Limit LEDs to monitor performance

XLR and 1/4'' TRS combination input connectors for compatibility with any source

Professional twist-lock speaker connectors for ultimate reliability

Independent DC, LF and thermal overload protection on each channel automatically protects amplifier and speakers without shutting down the show

"Back-to-front" ventilation system prevents thermal buildup for reliable operation

Designed and engineered in Germany

View full description
Loyalty dots logo
Earn 1859 loyalty dots equivalent to AED 18.59 when you sign-in and order
AED 1,859

NX3000D
The NX3000D power amplifier packs 3000 Watts (2 x 1500 Watts @ 2 Ohms; 2 x 900 Watts @ 4 Ohms; 3000 Watts into 4 Ohms bridge mode) into exceptionally lightweight (7.9 lbs / 3.6 kg) and rack-mountable packages. Plus, the built-in DSP and 24-bit/ 96 kHz converters ensure the ultimate signal integrity with an extremely broad dynamic range. And because the NX3000D is so much more efficient than conventional designs, it runs cooler and doesn’t require the massive heat sinks and heavy toroid transformers typically associated with its conventional counterparts. Thanks to our “Zero-Attack” limiters that offer maximum output level with exceptionally-reliable overload protection and SmartSense Loudspeaker impedance compensation, which provides fully linear frequency response at any speaker load impedance, you can run the NX3000D full-out for hours on-end. Our revolutionary high-density Class-D technology, combined with an ultra-efficient, switch-mode power supply ensure this feather-light powerhouse will drive your rig effortlessly for many years to come.

Delivers 2 x 1500 Watts into 2 Ohms; 2 x 900 Watts into 4 Ohms; 3000 Watts into 4 Ohms (bridge mode) and weighs less than 7.9 lbs / 3.6 kg

Ultimate reliability through revolutionary cool-running High-Density Class-D technology with "near-zero" thermal buildup

Ultra-efficient switch-mode power supply for noise-free audio, superior transient response and low power consumption

High-performance DSP and 24-bit/96 kHz converters deliver ultimate signal integrity and extreme dynamic range

DSP section features sophisticated delay, crossover (3 filter types, up to 48 dB/octave), EQ (8 parametric, 2 dynamic), dynamics processing and lockable security settings

SmartSense Loudspeaker impedance compensation features fully linear frequency response at any speaker load impedance

Front panel LCD display enables setup and adjustment without PC

Can be set up, controlled and monitored via rear panel USB connector. Powerful remote software downloadable at behringer.com

"Zero-Attack" limiters offer maximum output level with reliable overload protection

Built-in Subwoofer/Satellite crossover for perfect subwoofer operation

Detented gain controls for precise level setting

Precise 4-segment Signal and Limit LEDs to monitor performance

XLR and 1/4'' TRS combination input connectors for compatibility with any source

Professional twist-lock speaker connectors for ultimate reliability

Independent DC, LF and thermal overload protection on each channel automatically protects amplifier and speakers without shutting down the show

"Back-to-front" ventilation system prevents thermal buildup for reliable operation

Designed and engineered in Germany

View full description
View less description

Customers