Brand: THORENS
MODEL: 6624204116
Thorens TD-201 Manual Two-Speed Belt-Drive Turntable with Built-in Preamp - Black High Gloss
Store finder
The new Thorens TD 201 is the right choice for anyone looking for a robust, easy to use plug and play turntable. It comes with a smooth running belt drive and a aluminium platter with rubber mat. The new Thorens TP 71 tonearm uses a detachable headshell with preconfigured AT 3600 cartridge.
Free 1-year manufacturer’s warranty
The new Thorens TD 201 is the right choice for anyone looking for a robust, easy to use plug and play turntable. It comes with a smooth running belt drive and a aluminium platter with rubber mat. The new Thorens TP 71 tonearm uses a detachable headshell with preconfigured AT 3600 cartridge.
Technical Specifications: | |
|---|---|
| Drive System: | Belt Drive |
| Motor: | DC Motor |
| Speed: | 33 1/3 RPM, 45 RPM |
| Rotation Speed Variation: | +/–2% |
| Wow And Flutter: | 0.002 |
| Signal-To-Noise Ratio: | 67dB or higher (A-weighted, 20kHz LPF) / 60dB or higher (unweighted, 20kHz LPF) |
| Platter: | Aluminum Die-cast |
| Diameter Of Platter: | 12", 300mm |
| Tonearm Section: | Alumi tube |
| Type: | Static Balance, Straight |
| Effective Arm Length: | 8.8", 223.6mm |
| Stylus Pressure Range: | 0 to 4g |
| Supported Cartridge Weight: | 3.5 to 6.0g |
| Overhang: | 18.6mm |
| Anti-Skating Adjustment: | Supported |
| Cartridge Type: | MM type (Audio-Technica AT3600) |
| Stylus Construction: | Bonded Diamond |
| Frequency Response: | 20Hz to 20kHz |
| Channel Separation: | >18dB |
| Channel Balance: | 2.5dB |
| Vertical Tracking Angle: | 20 degrees |
| Supported Load Impedance: | 47k ohms |
| Output Voltage: | 2.5mV (1kHz, 3.54cm/sec.) |
| Stylus Pressure: | 3.5g +/–0.5g |
| Cartridge Weight: | 5g +/–0.5g |
| Head-Shell Weight: | 10g (including Screws, Nuts and Wires) |