Brand: THORENS
MODEL: 6624204117
Thorens TD-201 Manual Two-Speed Belt-Drive Turntable with Built-in Preamp - White High Gloss
Store finder
The new Thorens TD 201 is the right choice for anyone looking for a robust, easy to use plug and play turntable. It comes with a smooth running belt drive and a aluminium platter with rubber mat. The new Thorens TP 71 tonearm uses a detachable headshell with preconfigured AT 3600 cartridge.
The new Thorens TD 201 is the right choice for anyone looking for a robust, easy to use plug and play turntable. It comes with a smooth running belt drive and a aluminium platter with rubber mat. The new Thorens TP 71 tonearm uses a detachable headshell with preconfigured AT 3600 cartridge.
Technical Specifications: | |
---|---|
Drive System: | Belt Drive |
Motor: | DC Motor |
Speed: | 33 1/3 RPM, 45 RPM |
Rotation Speed Variation: | +/–2% |
Wow And Flutter: | 0.002 |
Signal-To-Noise Ratio: | 67dB or higher (A-weighted, 20kHz LPF) / 60dB or higher (unweighted, 20kHz LPF) |
Platter: | Aluminum Die-cast |
Diameter Of Platter: | 12", 300mm |
Tonearm Section: | Alumi tube |
Type: | Static Balance, Straight |
Effective Arm Length: | 8.8", 223.6mm |
Stylus Pressure Range: | 0 to 4g |
Supported Cartridge Weight: | 3.5 to 6.0g |
Overhang: | 18.6mm |
Anti-Skating Adjustment: | Supported |
Cartridge Type: | MM type (Audio-Technica AT3600) |
Stylus Construction: | Bonded Diamond |
Frequency Response: | 20Hz to 20kHz |
Channel Separation: | >18dB |
Channel Balance: | 2.5dB |
Vertical Tracking Angle: | 20 degrees |
Supported Load Impedance: | 47k ohms |
Output Voltage: | 2.5mV (1kHz, 3.54cm/sec.) |
Stylus Pressure: | 3.5g +/–0.5g |
Cartridge Weight: | 5g +/–0.5g |
Head-Shell Weight: | 10g (including Screws, Nuts and Wires) |